Comes with all the hardware necessary for installation.

PLEASE NOTE:

A few applications (always the Camper Special, but not every Camper Special) may have driver side clearance issues at the steering box. Please review the “Camper Special” information tab. “If” the standard FF427 driver side header set has clearance issues we recommend exchanging ONLY the driver side header for the driver side header from the part #FF393 header set. However, we now offer a specific header set for Camper Special applications, part FF427CS. If a driver side exchange is required, please get in touch with us by phone or through the Helpdesk.

Includes all hardware necessary for installation.

SPECIFICATIONS:

Engine: Ford 332-428 FE V8
Primary Tube Diameter: 1-3/4″
Collector Diameter: 3.0″

FEATURES:

• 16-Gauge Primary and Collector Tube Thickness
• 3/8″ Thick Flange
• Patented Flange Design Requires NO Gaskets
• Tightest Fitting Header Available Anywhere!
• Made in the USA

INCLUDES:

• Header Bolt Set
• Collector Reducer Set

FINISH:

Our Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, We apply a multi-layer inside and outside aluminized ceramic coating in-house and then polish the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases and increases the longevity of your header investment.

Comes with all the hardware necessary for installation.

PLEASE NOTE:

There are a minimal number of applications (always the Camper Special, but not every Camper Special) that may have driver side clearance issues at the steering box. Please review the “Camper Special” information tab. “If” the standard FF427 driver side header set has clearance issues, we recommend exchanging ONLY the driver side header for the driver side header from the part #FF393 header set. However, we now offer a specific header set for Camper Special applications, part FF427CS. If a driver side exchange is required, please contact us by phone or through the Helpdesk.

Includes all hardware necessary for installation.

SPECIFICATIONS:

Engine: Ford 332-428 FE V8
Primary Tube Diameter: 1-3/4″
Collector Diameter: 3.0″

FEATURES:

• 16-Gauge Primary and Collector Tube Thickness
• 3/8″ Thick Flange
• Patented Flange Design Requires NO Gaskets
• Tightest Fitting Header Available Anywhere!
• Made in the USA

INCLUDES:

• Header Bolt Set
• Collector Reducer Set

FINISH:

Our Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, We apply a multi-layer inside and outside aluminized ceramic coating in-house and then polish the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases and increases the longevity of your header investment.

The FF394 is our tightest-fitting header for Ford FE engines and may fit other vehicles and custom-built applications. Please compare the images and dimensions provided to the available space in the engine bay for compatibility with other vehicle applications. For example, the FF394 is compatible with some front clip grafts from the Ford Crown Victoria.

NOTES:

• Available for applications using Cobra Jet (CJ) or GT cylinder heads by ordering the 16-bolt flange option.

Includes all hardware necessary for installation.

SPECIFICATIONS:

Engine: Ford 332-428 FE V8
Primary Tube Diameter: 1-3/4″
Collector Diameter: 3.0″

FEATURES:

• 16-Gauge Primary and Collector Tube Thickness
• 3/8″ Thick Flange
• Patented Flange Design Requires NO Gaskets
• Tightest Fitting Header Available Anywhere!
• Made in the USA

INCLUDES:

• Header Bolt Set
• Collector Reducer Set

FINISH:

Our Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, We apply a multi-layer inside and outside aluminized ceramic coating in-house and then polish the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases and increases the longevity of your header investment.

NOTES:

• Not compatible with factory “power-assist” steering. Regular power steering is fine. See images for examples of power assist.
• Available for applications using Cobra Jet (CJ) or GT cylinder heads by ordering the 16-bolt flange option.

Includes all hardware necessary for installation.

SPECIFICATIONS:

Engine: Ford 332-428 FE V8
Primary Tube Diameter: 1-3/4″
Collector Diameter: 3.0″

FEATURES:

• 16-Gauge Primary and Collector Tube Thickness
• 3/8″ Thick Flange
• Patented Flange Design Requires NO Gaskets
• Tightest Fitting Header Available Anywhere!
• Made in the USA

INCLUDES:

• Header Bolt Set
• Collector Reducer Set

FINISH:

Our Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, We apply a multi-layer inside and outside aluminized ceramic coating in-house and then polish the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases and increases the longevity of your header investment.

• The FF391 header DOES NOT FIT Fairlane, which is not considered a full-size chassis.
• Fits 1958-1960 Thunderbird (if shock towers are removed)
• Does NOT fit MEL (Mercury-Edsel-Lincoln) engine applications.
• Available for applications using Cobra Jet (CJ) or GT cylinder heads by ordering the 16-bolt flange option.

Includes all hardware necessary for installation.

SPECIFICATIONS:

Engine: Ford 332-428 FE V8
Primary Tube Diameter: 1-3/4″
Collector Diameter: 3.0″

FEATURES:

• 16-Gauge Primary and Collector Tube Thickness
• 3/8″ Thick Flange
• Patented Flange Design Requires NO Gaskets
• Tightest Fitting Header Available Anywhere!
• Made in the USA

INCLUDES:

• Header Bolt Set
• Collector Reducer Set

FINISH:

Our Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, We apply a multi-layer inside and outside aluminized ceramic coating in-house and then polish the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases and increases the longevity of your header investment.

• The FF390 header DOES NOT FIT Fairlane or Thunderbird. These are not considered full-size chassis.
• Does NOT fit MEL (Mercury-Edsel-Lincoln) engine applications.
• Available for applications using Cobra Jet (CJ) or GT cylinder heads by ordering the 16-bolt flange option.

Includes all hardware necessary for installation.

SPECIFICATIONS:

Engine: Ford 332-428 FE V8
Primary Tube Diameter: 1-3/4″
Collector Diameter: 3.0″

FEATURES:

• 16-Gauge Primary and Collector Tube Thickness
• 3/8″ Thick Flange
• Patented Flange Design Requires NO Gaskets
• Tightest Fitting Header Available Anywhere!
• Made in the USA

INCLUDES:

• Header Bolt Set
• Collector Reducer Set

FINISH:

Our Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, We apply a multi-layer inside and outside aluminized ceramic coating in-house and then polish the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases and increases the longevity of your header investment.